Questions? We have Answers!

• Remove the Cap.
• Load your dry herb into the Tip chamber.
• Replace the Cap.
• Heat the Cap with a Torch or Induction Heater until it clicks (approximately 5–7 seconds).
• Inhale from the mouthpiece.
• The Cap will click again when cooled.
• Repeat heating for further extraction, save your AVB for later use, or store for your next session.

HOW TO USE VIDEO

We recommend that you use a butane torch lighter for optimal results. To ensure even heating, apply the heat to the cap, away from the end, and rotate the device steadily until you hear/feel a click. Directly heating the end of the cap will cause it to click prematurely, causing reduced vaporization.

DO NOT apply heat past the click.
Overheating will premenantley damage the cap.

With a torch lighter and a titanium tip, the typical heat-up phase takes 3-6 seconds and remains at vapor production temperature until the cool-down click about 30 seconds later. After the cool-down click, it is safe to begin another heating cycle. When using a soft flame lighter, the heat-up phase takes about 15 seconds. The stainless steel tip requires a longer heat-up time than the titanium tip.

VIDEO: Basic Heating Tips

VIDEO: Advanced Heating Tips

You can also heat your device with an Induction Heater.

VIDEO: Induction Heater Tips

To clean your device we suggest any cleaning solution of your choice, Isopropyl alcohol or just hot water and soap. 

Let your device sit in the cleaning solution for a few hours and make sure to rinse it thoroughly with hot water. Use a cotton swab or pipe cleaners to help remove any additional buildup left in the device.

REMEMBER: DO NOT SOAK YOUR CAP OR ANY WOOD PARTS

TIPS:

• The more frequently you clean your device the easier it will be to clean. 
• A clean device provides better taste
• If parts are hard to take apart run the device under hot water and use a twist and pull motion to pull pieces apart.
• Use a cotton swab to clean the inside of the cap.
• You do not need to remove the CCDs for cleaning, that is optional.
• Isopropyl alcohol can dry out the o-rings, remove rings before cleaning or use Dynawax to keep the rings moisturized to extend their life. 
• All Metal Devices are dishwasher safe.

VIDEO: How to Clean The "M" by DynaVap

VIDEO: DynaVap Use & Care

DynaVap devices require no batteries or electronics to work, but rather utilize any heat source (torch or induction heater), to heat a temperature indicating cap on a conduction/convection chamber.

No Batteries. No Fuss. 

Just pack, re-cap, heat, and enjoy!  

Check out these awesome videos of George explaining the technicalities behind his device and how it works! 

VIDEO: The Functionality of the DynaVap

VIDEO: How the Tip Works and the Purpose Behind the Different Tips

Learn more about how to heat the DynaVap here: How to heat a DynaVap Vaporizer

DynaVap proudly ships worldwide from the United States of America.

We fulfill next business day and offer 3-6 day shipping via USPS and UPS domestically and multiple options for international, including a flat-rate USPS or a quicker UPS option.

We are so confident you will enjoy the benefits DynaVap brings, that we are offering a 90-day money-back guarantee for all DynaVap Manufactured devices purchased directly from Dynavap.com.